Skip to main content
Version: Stable-3.1

Resource group

This topic describes the resource group feature of StarRocks.

resource group

With this feature, you could simultaneously run several workloads in a single cluster, including short query, ad-hoc query, ETL jobs, to save extra cost of deploying multiple clusters. From technical perspective, the execution engine would schedule concurrent workloads according to users' specification and isolate the interference among them.

The roadmap of Resource Group:

  • Since v2.2, StarRocks supports limiting resource consumption for queries and implementing isolation and efficient use of resources among tenants in the same cluster.
  • In StarRocks v2.3, you can further restrict the resource consumption for big queries, and prevent the cluster resources from getting exhausted by oversized query requests, to guarantee the system stability.
  • StarRocks v2.5 supports limiting computation resource consumption for data loading (INSERT).
Internal TableExternal TableBig Query RestrictionShort QueryINSERT INTOBroker LoadRoutine Load, Stream Load, Schema Change
2.2××××××
2.3×××
2.5××
3.1 and later×

Terms

This section describes the terms that you must understand before you use the resource group feature.

resource group

Each resource group is a set of computing resources from a specific BE. You can divide each BE of your cluster into multiple resource groups. When a query is assigned to a resource group, StarRocks allocates CPU and memory resources to the resource group based on the resource quotas that you specified for the resource group.

You can specify CPU and memory resource quotas for a resource group on a BE by using the following parameters:

  • cpu_core_limit

    This parameter specifies the soft limit for the number of CPU cores that can be allocated to the resource group on the BE. Valid values: any non-zero positive integer. Range: (1, avg_be_cpu_cores], where avg_be_cpu_cores represents the average number of CPU cores across all BEs.

    In actual business scenarios, CPU cores that are allocated to the resource group proportionally scale based on the availability of CPU cores on the BE.

    NOTE

    For example, you configure three resource groups on a BE that provides 16 CPU cores: rg1, rg2, and rg3. The values of cpu_core_limit for the three resource groups are 2, 6, and 8, respectively.

    If all CPU cores of the BE are occupied, the number of CPU cores that can be allocated to each of the three resource groups are 2, 6, and 8, respectively, based on the following calculations:

    • Number of CPU cores for rg1 = Total number of CPU cores on the BE × (2/16) = 2
    • Number of CPU cores for rg2 = Total number of CPU cores on the BE × (6/16) = 6
    • Number of CPU cores for rg3 = Total number of CPU cores on the BE × (8/16) = 8

    If not all CPU cores of the BE are occupied, as when rg1 and rg2 are loaded but rg3 is not, the number of CPU cores that can be allocated to rg1 and rg2 are 4 and 12, respectively, based on the following calculations:

    • Number of CPU cores for rg1 = Total number of CPU cores on the BE × (2/8) = 4
    • Number of CPU cores for rg2 = Total number of CPU cores on the BE × (6/8) = 12
  • mem_limit

    This parameter specifies the percentage of memory that can be used for queries in the total memory that is provided by the BE. Valid values: (0, 1).

    NOTE

    The amount of memory that can be used for queries is indicated by the query_pool parameter.

  • concurrency_limit

    This parameter specifies the upper limit of concurrent queries in a resource group. It is used to avoid system overload caused by too many concurrent queries. This parameter takes effect only when it is set greater than 0. Default: 0.

  • max_cpu_cores

    The CPU core threshold for triggering query queue in FE. This only takes effect when it is set to greater than 0. Range: [0, avg_be_cpu_cores], where avg_be_cpu_cores represents the average number of CPU cores across all BE nodes. Default: 0.

  • spill_mem_limit_threshold

    The memory usage threshold (percentage) at which a resource group triggers the spilling of intermediate results. The valid range is (0, 1). The default value is 1, indicating the threshold does not take effect. This parameter was introduced in v3.1.7.

    • If automatic spilling is enabled (that is, the system variable spill_mode is set to auto) but the resource group feature is disabled, the system will trigger spilling when the memory usage of a query exceeds 80% of query_mem_limit. Here, query_mem_limit is the maximum memory that a single query can use, controlled by the system variable query_mem_limit, with a default value of 0, indicating no limit.
    • If automatic spilling is enabled, and the query hits a resource group (including all system built-in resource groups), spilling will be triggered if the query meets any of the following conditions:
      • The memory used by all queries in the current resource group exceeds current BE node memory limit * mem_limit * spill_mem_limit_threshold.
      • The current query consumes more than 80% of query_mem_limit.

On the basis of the above resource consumption restrictions, you can further restrict the resource consumption for big queries with the following parameters:

  • big_query_cpu_second_limit: This parameter specifies the CPU upper time limit for a big query on a single BE. Concurrent queries add up the time. The unit is second. This parameter takes effect only when it is set greater than 0. Default: 0.
  • big_query_scan_rows_limit: This parameter specifies the scan row count upper limit for a big query on a single BE. This parameter takes effect only when it is set greater than 0. Default: 0.
  • big_query_mem_limit: This parameter specifies the memory usage upper limit for a big query on a single BE. The unit is byte. This parameter takes effect only when it is set greater than 0. Default: 0.

NOTE

When a query running in a resource group exceeds the above big query limit, the query will be terminated with an error. You can also view error messages in the ErrorCode column of the FE node fe.audit.log.

You can set the resource group type to short_query, or normal.

  • The default value is normal. You do not need specify normal in the parameter type.
  • When queries hit a short_query resource group, the BE node reserves the CPU resource specified in short_query.cpu_core_limit. The CPU resource reserved for queries that hit normal resource group is limited to BE core - short_query.cpu_core_limit.
  • When no query hits the short_query resource group, no limit is imposed to the resource of normal resource group.

CAUTION

  • You can create at most ONE short query resource group in a StarRocks Cluster.
  • StarRocks does not set set a hard upper limit of CPU resource for short_query resource group.

System-defined resource groups

There are two system-defined resource groups in each StarRocks instance: default_wg and default_mv_wg.

default_wg

default_wg will be assigned to regular queries that are under the management of resource groups but don't match any classifier. The resource limits of default_wg are as follows:

  • cpu_core_limit: 1 (for v2.3.7 or earlier) or the number of CPU cores of the BE (for versions later than v2.3.7).
  • mem_limit: 100%.
  • concurrency_limit: 0.
  • big_query_cpu_second_limit: 0.
  • big_query_scan_rows_limit: 0.
  • big_query_mem_limit: 0.
  • spill_mem_limit_threshold: 1.
default_mv_wg

default_mv_wg will be assigned to asynchronous materialized view refresh tasks if no resource group is allocated to the corresponding materialized view in the property resource_group during materialized view creation. The resource limits of default_mv_wg are as follows:

  • cpu_core_limit: 1.
  • mem_limit: 80%.
  • concurrency_limit: 0.
  • spill_mem_limit_threshold: 80%.

You can configure the CPU core limit, memory limit, concurrency limit, and spilling threshold of default_mv_wg by modifying the BE configuration items default_mv_resource_group_cpu_limit, default_mv_resource_group_memory_limit, default_mv_resource_group_concurrency_limit, default_mv_resource_group_spill_mem_limit_threshold.

classifier

Each classifier holds one or more conditions that can be matched to the properties of queries. StarRocks identifies the classifier that best matches each query based on the match conditions and assigns resources for running the query.

Classifiers support the following conditions:

  • user: the name of the user.
  • role: the role of the user.
  • query_type: the type of the query. SELECT and INSERT (from v2.5) are supported. When INSERT INTO or BROKER LOAD tasks hit a resource group with query_type as insert, the BE node reserves the specified CPU resources for the tasks.
  • source_ip: the CIDR block from which the query is initiated.
  • db: the database which the query accesses. It can be specified by strings separated by commas ,.
  • plan_cpu_cost_range: The estimated CPU cost range of the query. The format is (DOUBLE, DOUBLE]. The default value is NULL, indicating no such restriction. The PlanCpuCost column in fe.audit.log represents the system's estimate of the CPU cost for the query. This parameter is supported from v3.1.4 onwards.
  • plan_mem_cost_range: The system-estimated memory cost range of a query. The format is (DOUBLE, DOUBLE]. The default value is NULL, indicating no such restriction. The PlanMemCost column in fe.audit.log represents the system's estimate of the memory cost for the query. This parameter is supported from v3.1.4 onwards.

A classifier matches a query only when one or all conditions of the classifier match the information about the query. If multiple classifiers match a query, StarRocks calculates the degree of matching between the query and each classifier and identifies the classifier with the highest degree of matching.

NOTE

You can view the resource group to which a query belongs in the ResourceGroup column of the FE node fe.audit.log or by running EXPLAIN VERBOSE <query>, as described in View the resource group of a query.

StarRocks calculates the degree of matching between a query and a classifier by using the following rules:

  • If the classifier has the same value of user as the query, the degree of matching of the classifier increases by 1.
  • If the classifier has the same value of role as the query, the degree of matching of the classifier increases by 1.
  • If the classifier has the same value of query_type as the query, the degree of matching of the classifier increases by 1 plus the number obtained from the following calculation: 1/Number of query_type fields in the classifier.
  • If the classifier has the same value of source_ip as the query, the degree of matching of the classifier increases by 1 plus the number obtained from the following calculation: (32 - cidr_prefix)/64.
  • If the classifier has the same value of db as the query, the degree of matching of the classifier increases by 10.
  • If the query's CPU cost falls within the plan_cpu_cost_range, the degree of matching of the classifier increases by 1.
  • If the query's memory cost falls within the plan_mem_cost_range, the degree of matching of the classifier increases by 1.

If multiple classifiers match a query, the classifier with a larger number of conditions has a higher degree of matching.

-- Classifier B has more conditions than Classifier A. Therefore, Classifier B has a higher degree of matching than Classifier A.


classifier A (user='Alice')


classifier B (user='Alice', source_ip = '192.168.1.0/24')

If multiple matching classifiers have the same number of conditions, the classifier whose conditions are described more accurately has a higher degree of matching.

-- The CIDR block that is specified in Classifier B is smaller in range than Classifier A. Therefore, Classifier B has a higher degree of matching than Classifier A.
classifier A (user='Alice', source_ip = '192.168.1.0/16')
classifier B (user='Alice', source_ip = '192.168.1.0/24')

-- Classifier C has fewer query types specified in it than Classifier D. Therefore, Classifier C has a higher degree of matching than Classifier D.
classifier C (user='Alice', query_type in ('select'))
classifier D (user='Alice', query_type in ('insert','select'))

If multiple classifiers have the same degree of matching, one of the classifiers will be randomly selected.

-- If a query simultaneously queries both db1 and db2 and the classifiers E and F have the 
-- highest degree of matching among the hit classifiers, one of E and F will be randomly selected.
classifier E (db='db1')
classifier F (db='db2')

Isolate computing resources

You can isolate computing resources among queries by configuring resource groups and classifiers.

Enable resource groups

To use resource group, you must enable Pipeline Engine for your StarRocks cluster:

-- Enable Pipeline Engine in the current session.
SET enable_pipeline_engine = true;
-- Enable Pipeline Engine globally.
SET GLOBAL enable_pipeline_engine = true;

For loading tasks, you also need to set the FE configuration item enable_pipeline_load to enable the Pipeline engine for loading tasks. This item is supported from v2.5.0 onwards.

ADMIN SET FRONTEND CONFIG ("enable_pipeline_load" = "true");

NOTE

From v3.1.0 onwards, Resource Group is enabled by default, and the session variable enable_resource_group is deprecated.

Create resource groups and classifiers

Execute the following statement to create a resource group, associate the resource group with a classifier, and allocate computing resources to the resource group:

CREATE RESOURCE GROUP <group_name> 
TO (
user='string',
role='string',
query_type in ('select'),
source_ip='cidr'
) --Create a classifier. If you create more than one classifier, separate the classifiers with commas (`,`).
WITH (
"cpu_core_limit" = "INT",
"mem_limit" = "m%",
"concurrency_limit" = "INT",
"type" = "str" --The type of the resource group. Set the value to normal.
);

Example:

CREATE RESOURCE GROUP rg1
TO
(user='rg1_user1', role='rg1_role1', query_type in ('select'), source_ip='192.168.x.x/24'),
(user='rg1_user2', query_type in ('select'), source_ip='192.168.x.x/24'),
(user='rg1_user3', source_ip='192.168.x.x/24'),
(user='rg1_user4'),
(db='db1')
WITH (
'cpu_core_limit' = '10',
'mem_limit' = '20%',
'big_query_cpu_second_limit' = '100',
'big_query_scan_rows_limit' = '100000',
'big_query_mem_limit' = '1073741824'
);

Specify resource group (Optional)

You can specify resource group for the current session directly.

SET resource_group = 'group_name';

View resource groups and classifiers

Execute the following statement to query all resource groups and classifiers:

SHOW RESOURCE GROUPS ALL;

Execute the following statement to query the resource groups and classifiers of the logged-in user:

SHOW RESOURCE GROUPS;

Execute the following statement to query a specified resource group and its classifiers:

SHOW RESOURCE GROUP group_name;

Example:

mysql> SHOW RESOURCE GROUPS ALL;
+------+--------+--------------+----------+------------------+--------+------------------------------------------------------------------------------------------------------------------------+
| Name | Id | CPUCoreLimit | MemLimit | ConcurrencyLimit | Type | Classifiers |
+------+--------+--------------+----------+------------------+--------+------------------------------------------------------------------------------------------------------------------------+
| rg1 | 300039 | 10 | 20.0% | 11 | NORMAL | (id=300040, weight=4.409375, user=rg1_user1, role=rg1_role1, query_type in (SELECT), source_ip=192.168.2.1/24) |
| rg1 | 300039 | 10 | 20.0% | 11 | NORMAL | (id=300041, weight=3.459375, user=rg1_user2, query_type in (SELECT), source_ip=192.168.3.1/24) |
| rg1 | 300039 | 10 | 20.0% | 11 | NORMAL | (id=300042, weight=2.359375, user=rg1_user3, source_ip=192.168.4.1/24) |
| rg1 | 300039 | 10 | 20.0% | 11 | NORMAL | (id=300043, weight=1.0, user=rg1_user4) |
+------+--------+--------------+----------+------------------+--------+------------------------------------------------------------------------------------------------------------------------+

NOTE

In the preceding example, weight indicates the degree of matching.

Manage resource groups and classifiers

You can modify the resource quotas for each resource group. You can also add or delete classifiers from resource groups.

Execute the following statement to modify the resource quotas for an existing resource group:

ALTER RESOURCE GROUP group_name WITH (
'cpu_core_limit' = 'INT',
'mem_limit' = 'm%'
);

Execute the following statement to delete a resource group:

DROP RESOURCE GROUP group_name;

Execute the following statement to add a classifier to a resource group:

ALTER RESOURCE GROUP <group_name> ADD (user='string', role='string', query_type in ('select'), source_ip='cidr');

Execute the following statement to delete a classifier from a resource group:

ALTER RESOURCE GROUP <group_name> DROP (CLASSIFIER_ID_1, CLASSIFIER_ID_2, ...);

Execute the following statement to delete all classifiers of a resource group:

ALTER RESOURCE GROUP <group_name> DROP ALL;

Observe resource groups

View the resource group of a query

You can view the resource group that a query hits from the ResourceGroup column in the fe.audit.log, or from the RESOURCE GROUP column returned after executing EXPLAIN VERBOSE <query>. They indicate the resource group that a specific query task matches.

  • If the query is not under the management of resource groups, the column value is an empty string "".
  • If the query is under the management of resource groups but doesn't match any classifier, the column value is an empty string "". But this query is assigned to the default resource group default_wg.

Monitoring resource groups

You can set up monitoring and alerting for your resource groups.

Resource group-related FE and BE metrics are as follows. All the metrics below have a name label indicating their corresponding resource group.

FE metrics

The following FE metrics only provide statistics within the current FE node:

MetricUnitTypeDescription
starrocks_fe_query_resource_groupCountInstantaneousThe number of queries historically run in this resource group (including those currently running).
starrocks_fe_query_resource_group_latencymsInstantaneousThe query latency percentile for this resource group. The label type indicates specific percentiles, including mean, 75_quantile, 95_quantile, 98_quantile, 99_quantile, 999_quantile.
starrocks_fe_query_resource_group_errCountInstantaneousThe number of queries in this resource group that encountered an error.
starrocks_fe_resource_group_query_queue_totalCountInstantaneousThe total number of queries historically queued in this resource group (including those currently running). This metric is supported from v3.1.4 onwards. It is valid only when query queues are enabled.
starrocks_fe_resource_group_query_queue_pendingCountInstantaneousThe number of queries currently in the queue of this resource group. This metric is supported from v3.1.4 onwards. It is valid only when query queues are enabled.
starrocks_fe_resource_group_query_queue_timeoutCountInstantaneousThe number of queries in this resource group that have timed out while in the queue. This metric is supported from v3.1.4 onwards. It is valid only when query queues are enabled.

BE metrics

MetricUnitTypeDescription
resource_group_running_queriesCountInstantaneousThe number of queries currently running in this resource group.
resource_group_total_queriesCountInstantaneousThe number of queries historically run in this resource group (including those currently running).
resource_group_bigquery_countCountInstantaneousThe number of queries in this resource group that triggered the big query limit.
resource_group_concurrency_overflow_countCountInstantaneousThe number of queries in this resource group that triggered the concurrency_limit limit.
resource_group_mem_limit_bytesBytesInstantaneousThe memory limit for this resource group.
resource_group_mem_inuse_bytesBytesInstantaneousThe memory currently in use by this resource group.
resource_group_cpu_limit_ratioPercentageInstantaneousThe ratio of this resource group's cpu_core_limit to the total cpu_core_limit across all resource groups.
resource_group_inuse_cpu_coresCountAverageThe estimated number of CPU cores in use by this resource group. This value is an approximate estimate. It represents the average value calculated based on the statistics from two consecutive metric collections. This metric is supported from v3.1.4 onwards.
resource_group_cpu_use_ratioPercentageAverageDeprecated The ratio of the Pipeline thread time slices used by this resource group to the total Pipeline thread time slices used by all resource groups. It represents the average value calculated based on the statistics from two consecutive metric collections.
resource_group_connector_scan_use_ratioPercentageAverageDeprecated The ratio of the external table Scan thread time slices used by this resource group to the total Pipeline thread time slices used by all resource groups. It represents the average value calculated based on the statistics from two consecutive metric collections.
resource_group_scan_use_ratioPercentageAverageDeprecated The ratio of the internal table Scan thread time slices used by this resource group to the total Pipeline thread time slices used by all resource groups. It represents the average value calculated based on the statistics from two consecutive metric collections.

View resource group usage information

From v3.1.4 onwards, StarRocks supports the SQL statement SHOW USAGE RESOURCE GROUPS, which is used to display usage information for each resource group across BEs. The descriptions of each field are as follows:

  • Name: The name of the resource group.
  • Id: The ID of the resource group.
  • Backend: The BE's IP or FQDN.
  • BEInUseCpuCores: The number of CPU cores currently in use by this resource group on this BE. This value is an approximate estimate.
  • BEInUseMemBytes: The number of memory bytes currently in use by this resource group on this BE.
  • BERunningQueries: The number of queries from this resource group that are still running on this BE.

Please note:

  • BEs periodically report this resource usage information to the Leader FE at the interval specified in report_resource_usage_interval_ms, which is by default set to 1 second.
  • The results will only show rows where at least one of BEInUseCpuCores/BEInUseMemBytes/BERunningQueries is a positive number. In other words, the information is displayed only when a resource group is actively using some resources on a BE.

Example:

MySQL [(none)]> SHOW USAGE RESOURCE GROUPS;
+------------+----+-----------+-----------------+-----------------+------------------+
| Name | Id | Backend | BEInUseCpuCores | BEInUseMemBytes | BERunningQueries |
+------------+----+-----------+-----------------+-----------------+------------------+
| default_wg | 0 | 127.0.0.1 | 0.100 | 1 | 5 |
+------------+----+-----------+-----------------+-----------------+------------------+
| default_wg | 0 | 127.0.0.2 | 0.200 | 2 | 6 |
+------------+----+-----------+-----------------+-----------------+------------------+
| wg1 | 0 | 127.0.0.1 | 0.300 | 3 | 7 |
+------------+----+-----------+-----------------+-----------------+------------------+
| wg2 | 0 | 127.0.0.1 | 0.400 | 4 | 8 |
+------------+----+-----------+-----------------+-----------------+------------------+