Skip to main content
Version: 2.5

BROKER LOAD

Description​

StarRocks provides the MySQL-based loading method Broker Load. After you submit a load job, StarRocks asynchronously runs the job. You need to use SHOW LOAD or curl to check the job result. For more information about the background information, prerequisites, principles, supported data file formats, supported external storage systems, and how to perform single-table loads and multi-table loads, see Load data from HDFS or cloud storage.

Syntax​

LOAD LABEL [<database_name>.]<label_name>
(
    data_desc[, data_desc ...]
)
WITH BROKER
(
    StorageCredentialParams
)
[PROPERTIES
(
    opt_properties
)
]

Note that in StarRocks some literals are used as reserved keywords by the SQL language. Do not directly use these keywords in SQL statements. If you want to use such a keyword in an SQL statement, enclose it in a pair of backticks (`). See Keywords.

Parameters​

database_name and label_name​

label_name specifies the label of the load job.

database_name optionally specifies the name of the database to which the destination table belongs.

Each load job has a label that is unique across the entire database. You can use the label of a load job to view the execution status of the load job and prevent repeatedly loading the same data. When a load job enters the FINISHED state, its label cannot be reused. Only the label of a load job that has entered the CANCELLED state can be reused. In most cases, the label of a load job is reused to retry that load job and load the same data, thereby implementing Exactly-Once semantics.

For label naming conventions, see System limits.

data_desc​

The description of a batch of data to be loaded. Each data_desc descriptor declares information such as the data source, ETL functions, destination StarRocks table, and destination partitions.

Broker Load supports loading multiple data files at a time. In one load job, you can use multiple data_desc descriptors to declare multiple data files you want to load, or use one data_desc descriptor to declare one file path from which you want to load all data files in it. Broker Load can also ensure the transactional atomicity of each load job that is run to load multiple data files. Atomicity means that the loading of multiple data files in one load job must all succeed or fail. It never happens that the loading of some data files succeeds while the loading of the other files fails.

data_desc supports the following syntax:

DATA INFILE ("<file_path>"[, "<file_path>" ...])
[NEGATIVE]
INTO TABLE <table_name>
[PARTITION (<partition1_name>[, <partition2_name> ...])]
[TEMPORARY PARTITION (<temporary_partition1_name>[, <temporary_partition2_name> ...])]
[COLUMNS TERMINATED BY "<column_separator>"]
[ROWS TERMINATED BY "<row_separator>"]
[FORMAT AS "CSV | Parquet | ORC"]
[(column_list)]
[COLUMNS FROM PATH AS (<partition_field_name>[, <partition_field_name> ...])]
[SET <k1=f1(v1)>[, <k2=f2(v2)> ...]]
[WHERE predicate]

data_desc must include the following parameters:

  • file_path

    Specifies the save path of one or more data files you want to load.

    You can specify this parameter as the save path of one data file. For example, you can specify this parameter as "hdfs://<hdfs_host>:<hdfs_port>/user/data/tablename/20210411" to load a data file named 20210411 from the path /user/data/tablename on the HDFS server.

    You can also specify this parameter as the save path of multiple data files by using wildcards ?, *, [], {}, or ^. See Wildcard reference. For example, you can specify this parameter as "hdfs://<hdfs_host>:<hdfs_port>/user/data/tablename/*/*" or "hdfs://<hdfs_host>:<hdfs_port>/user/data/tablename/dt=202104*/*" to load the data files from all partitions or only 202104 partitions in the path /user/data/tablename on the HDFS server.

    NOTE

    Wildcards can also be used to specify intermediate paths.

    In the preceding examples, the hdfs_host and hdfs_port parameters are described as follows:

    • hdfs_host: the IP address of the NameNode host in the HDFS cluster.

    • hdfs_host: the FS port of the NameNode host in the HDFS cluster. The default port number is 9000.

    NOTICE

    Broker Load supports accessing AWS S3 according to the S3 or S3A protocol. Therefore, when you load data from AWS S3, you can include s3:// or s3a:// as the prefix in the S3 URI that you pass as the file path.

  • INTO TABLE

    Specifies the name of the destination StarRocks table.

data_desc can also optionally include the following parameters:

  • NEGATIVE

    Revokes the loading of a specific batch of data. To achieve this, you need to load the same batch of data with the NEGATIVE keyword specified.

    NOTE

    This parameter is valid only when the StarRocks table is an Aggregate table and all its value columns are computed by the sum function.

  • PARTITION

    Specifies the partitions into which you want to load data. By default, if you do not specify this parameter, the source data will be loaded into all partitions of the StarRocks table.

  • TEMPORARY_PARTITION

    Specifies the name of the temporary partition into which you want to load data. You can specify multiple temporary partitions, which must be separated by commas (,).

  • COLUMNS TERMINATED BY

    Specifies the column separator used in the data file. By default, if you do not specify this parameter, this parameter defaults to \t, indicating tab. The column separator you specify using this parameter must be the same as the column separator that is actually used in the data file. Otherwise, the load job will fail due to inadequate data quality, and its State will be CANCELLED.

    Broker Load jobs are submitted according to the MySQL protocol. StarRocks and MySQL both escape characters in the load requests. Therefore, if the column separator is an invisible character such as tab, you must add a backslash () preceding the column separator. For example, you must input \\t if the column separator is \t, and you must input \\n if the column separator is \n. Apache Hive™ files use \x01 as their column separator, so you must input \\x01 if the data file is from Hive.

    NOTE

    • For CSV data, you can use a UTF-8 string, such as a comma (,), tab, or pipe (|), whose length does not exceed 50 bytes as a text delimiter.
    • Null values are denoted by using \N. For example, a data file consists of three columns, and a record from that data file holds data in the first and third columns but no data in the second column. In this situation, you need to use \N in the second column to denote a null value. This means the record must be compiled as a,\N,b instead of a,,b. a,,b denotes that the second column of the record holds an empty string.

  • ROWS TERMINATED BY

    Specifies the row separator used in the data file. By default, if you do not specify this parameter, this parameter defaults to \n, indicating line break. The row separator you specify using this parameter must be the same as the row separator that is actually used in the data file. Otherwise, the load job will fail due to inadequate data quality, and its State will be CANCELLED. This parameter is supported from v2.5.4 onwards.

    For the usage notes about the row separator, see the usage notes for the preceding COLUMNS TERMINATED BY parameter.

  • FORMAT AS

    Specifies the format of the data file. Valid values: CSV, Parquet, and ORC. By default, if you do not specify this parameter, StarRocks determines the data file format based on the filename extension .csv, .parquet, or .orc specified in the file_path parameter.

  • column_list

    Specifies the column mapping between the data file and the StarRocks table. Syntax: (<column_name>[, <column_name> ...]). The columns declared in column_list are mapped by name onto the StarRocks table columns.

    NOTE

    If the columns of the data file are mapped in sequence onto the columns of the StarRocks table, you do not need to specify column_list.

    If you want to skip a specific column of the data file, you only need to temporarily name that column as different from any of the StarRocks table columns. For more information, see Transform data at loading.

  • COLUMNS FROM PATH AS

    Extracts the information about one or more partition fields from the file path you specify. This parameter is valid only when the file path contains partition fields.

    For example, if the data file is stored in the path /path/col_name=col_value/file1 in which col_name is a partition field and can be mapped onto a column of the StarRocks table, you can specify this parameter as col_name. As such, StarRocks extracts col_value values from the path and loads them into the StarRocks table column onto which col_name is mapped.

    NOTE

    This parameter is available only when you load data from HDFS.

  • SET

    Specifies one or more functions that you want to use to convert a column of the data file. Examples:

    • The StarRocks table consists of three columns, which are col1, col2, and col3 in sequence. The data file consists of four columns, among which the first two columns are mapped in sequence onto col1 and col2 of the StarRocks table and the sum of the last two columns is mapped onto col3 of the StarRocks table. In this case, you need to specify column_list as (col1,col2,tmp_col3,tmp_col4) and specify (col3=tmp_col3+tmp_col4) in the SET clause to implement data conversion.
    • The StarRocks table consists of three columns, which are year, month, and day in sequence. The data file consists of only one column that accommodates date and time values in yyyy-mm-dd hh:mm:ss format. In this case, you need to specify column_list as (tmp_time) and specify (year = year(tmp_time), month=month(tmp_time), day=day(tmp_time)) in the SET clause to implement data conversion.

  • WHERE

    Specifies the conditions based on which you want to filter the source data. StarRocks loads only the source data that meets the filter conditions specified in the WHERE clause.

WITH BROKER​

In v2.4 and earlier, input WITH BROKER "<broker_name>" to specify the broker you want to use. From v2.5 onwards, you no longer need to specify a broker, but you still need to retain the WITH BROKER keyword. For more information, see Load data from HDFS or cloud storage > Background information.

StorageCredentialParams​

The authentication information used by StarRocks to access your storage system.

HDFS​

Open-source HDFS supports two authentication methods: simple authentication and Kerberos authentication. Broker Load uses simple authentication by default. Open-source HDFS also supports configuring an HA mechanism for the NameNode. If you choose open-source HDFS as your storage system, you can specify the authentication configuration and HA configuration as follows:

  • Authentication configuration

    • If you use simple authentication, configure StorageCredentialParams as follows:

      "hadoop.security.authentication" = "simple",
      "username" = "<hdfs_username>",
      "password" = "<hdfs_password>"

      The following table describes the parameters in StorageCredentialParams.

      ParameterDescription
      hadoop.security.authenticationThe authentication method. Valid values: simple and kerberos. Default value: simple. simple represents simple authentication, meaning no authentication, and kerberos represents Kerberos authentication.
      usernameThe username of the account that you want to use to access the NameNode of the HDFS cluster.
      passwordThe password of the account that you want to use to access the NameNode of the HDFS cluster.

    • If you use Kerberos authentication, configure StorageCredentialParams as follows:

      "hadoop.security.authentication" = "kerberos",
      "kerberos_principal" = "nn/zelda1@ZELDA.COM",
      "kerberos_keytab" = "/keytab/hive.keytab",
      "kerberos_keytab_content" = "YWFhYWFh"

      The following table describes the parameters in StorageCredentialParams.

      ParameterDescription
      hadoop.security.authenticationThe authentication method. Valid values: simple and kerberos. Default value: simple. simple represents simple authentication, meaning no authentication, and kerberos represents Kerberos authentication.
      kerberos_principalThe Kerberos principal to be authenticated. Each principal consists of the following three parts to ensure that it is unique across the HDFS cluster:
      • username or servicename: The name of the principal.
      • instance: the name of the server that hosts the node to be authenticated in the HDFS cluster. The server name helps ensure that the principal is unique, for example, when the HDFS cluster consists of multiple DataNodes that each are independently authenticated.
      • realm: The name of the realm. The realm name must be capitalized.
      Example: nn/zelda1@ZELDA.COM.
      kerberos_keytabThe save path of the Kerberos keytab file.
      kerberos_keytab_contentThe Base64-encoded content of the the Kerberos keytab file. You can choose to specify either kerberos_keytab or kerberos_keytab_content.

      If you have configured multiple Kerberos users, make sure that at least one independent broker group is deployed, and in the load statement you must input WITH BROKER "<broker_name>" to specify the broker group you want to use. Additionally, you must open the broker startup script file start_broker.sh and modify line 42 of the file to enable the brokers to read the krb5.conf file. Example:

      export JAVA_OPTS="-Dlog4j2.formatMsgNoLookups=true -Xmx1024m -Dfile.encoding=UTF-8 -Djava.security.krb5.conf=/etc/krb5.conf"

      NOTE

      • In the preceding example, /etc/krb5.conf can be replaced with your actual save path of the krb5.conf file. Make sure that the broker has read permissions on that file. If the broker group consists of multiple brokers, you must modify the start_broker.sh file on each broker node and then restart the broker nodes to make the modifications take effect.
      • You can use the SHOW BROKER statement to check for brokers that are deployed in your StarRocks cluster.

  • HA configuration

    You can configure an HA mechanism for the NameNode of the HDFS cluster. This way, if the NameNode is switched over to another node, StarRocks can automatically identify the new node that serves as the NameNode. This includes the following scenarios:

    • If you load data from a single HDFS cluster that has one Kerberos user configured, both broker-based loading and broker-free loading are supported.

      • To perform broker-based loading, make sure that at least one independent broker group is deployed, and place the hdfs-site.xml file to the {deploy}/conf path on the broker node that serves the HDFS cluster. StarRocks will add the {deploy}/conf path to the environment variable CLASSPATH upon broker startup, allowing the brokers to read information about the HDFS cluster nodes.

      • To perform broker-free loading, place the hdfs-site.xml file to the {deploy}/conf paths of each FE node and each BE node.

    • If you load data from a single HDFS cluster that has multiple Kerberos users configured, only broker-based loading is supported. Make sure that at least one independent broker group is deployed, and place the hdfs-site.xml file to the {deploy}/conf path on the broker node that serves the HDFS cluster. StarRocks will add the {deploy}/conf path to the environment variable CLASSPATH upon broker startup, allowing the brokers to read information about the HDFS cluster nodes.

    • If you load data from multiple HDFS clusters (regardless of whether one or multiple Kerberos users are configured), only broker-based loading is supported. Make sure that at least one independent broker group is deployed for each of these HDFS clusters, and take one of the following actions to enable the brokers to read information about the HDFS cluster nodes:

      • Place the hdfs-site.xml file to the {deploy}/conf path on the broker node that serves each HDFS cluster. StarRocks will add the {deploy}/conf path to the environment variable CLASSPATH upon broker startup, allowing the brokers to read information about the nodes in that HDFS cluster.

      • Add the following HA configuration at job creation:

        "dfs.nameservices" = "ha_cluster",
        "dfs.ha.namenodes.ha_cluster" = "ha_n1,ha_n2",
        "dfs.namenode.rpc-address.ha_cluster.ha_n1" = "<hdfs_host>:<hdfs_port>",
        "dfs.namenode.rpc-address.ha_cluster.ha_n2" = "<hdfs_host>:<hdfs_port>",
        "dfs.client.failover.proxy.provider" = "org.apache.hadoop.hdfs.server.namenode.ha.ConfiguredFailoverProxyProvider"

        The following table describes the parameters in the HA configuration.

        ParameterDescription
        dfs.nameservicesThe name of the HDFS cluster.
        dfs.ha.namenodes.XXXThe name of the NameNode in the HDFS cluster. If you specify multiple NameNode names, separate them with commas (,). xxx is the HDFS cluster name that you have specified in dfs.nameservices.
        dfs.namenode.rpc-address.XXX.NNThe RPC address of the NameNode in the HDFS cluster. NN is the NameNode name that you have specified in dfs.ha.namenodes.XXX.
        dfs.client.failover.proxy.providerThe provider of the NameNode to which the client will connect. Default value: org.apache.hadoop.hdfs.server.namenode.ha.ConfiguredFailoverProxyProvider.

    NOTE

    You can use the SHOW BROKER statement to check for brokers that are deployed in your StarRocks cluster.

AWS S3​

If you choose AWS S3 as your storage system, take one of the following actions:

  • To choose the instance profile-based authentication method, configure StorageCredentialParams as follows:

    "aws.s3.use_instance_profile" = "true",
    "aws.s3.region" = "<aws_s3_region>"

  • To choose the assumed role-based authentication method, configure StorageCredentialParams as follows:

    "aws.s3.use_instance_profile" = "true",
    "aws.s3.iam_role_arn" = "<iam_role_arn>",
    "aws.s3.region" = "<aws_s3_region>"

  • To choose the IAM user-based authentication method, configure StorageCredentialParams as follows:

    "aws.s3.use_instance_profile" = "false",
    "aws.s3.access_key" = "<iam_user_access_key>",
    "aws.s3.secret_key" = "<iam_user_secret_key>",
    "aws.s3.region" = "<aws_s3_region>"

The following table describes the parameters you need to configure in StorageCredentialParams.

ParameterRequiredDescription
aws.s3.use_instance_profileYesSpecifies whether to enable the credential methods instance profile and assumed role. Valid values: true and false. Default value: false.
aws.s3.iam_role_arnNoThe ARN of the IAM role that has privileges on your AWS S3 bucket. If you choose assumed role as the credential method for accessing AWS S3, you must specify this parameter. Then, StarRocks will assume this role when it accesses your Hive data by using a Hive catalog.
aws.s3.regionYesThe region in which your AWS S3 bucket resides. Example: us-west-1.
aws.s3.access_keyNoThe access key of your AWS IAM user. If you choose IAM user as the credential method for accessing AWS S3, you must specify this parameter. Then, StarRocks will assume this role when it accesses your Hive data by using a Hive catalog.
aws.s3.secret_keyNoThe secret key of your AWS IAM user. If you choose IAM user as the credential method for accessing AWS S3, you must specify this parameter. Then, StarRocks will assume this user when it accesses your Hive data by using a Hive catalog.

For information about how to choose an authentication method for accessing AWS S3 and how to configure an access control policy in AWS IAM Console, see Authentication parameters for accessing AWS S3.

Google GCS​

If you choose Google GCS as your storage system, configure StorageCredentialParams as follows:

"fs.s3a.access.key" = "<gcs_access_key>",
"fs.s3a.secret.key" = "<gcs_secret_key>",
"fs.s3a.endpoint" = "<gcs_endpoint>"

The following table describes the parameters you need to configure in StorageCredentialParams.

ParameterDescription
fs.s3a.access.keyThe Access Key that you can use to access your Google GCS bucket.
fs.s3a.secret.keyThe Secret Key that you can use to access your Google GCS bucket.
fs.s3a.endpointThe endpoint that you can use to access your Google GCS bucket.

NOTE

Broker Load supports accessing Google GCS only according to the S3A protocol. Therefore, when you load data from Google GCS, you must replace the prefix in the GCS URI you pass as a file path into DATA INFILE with s3a://.

To create an Access/Secret key pair to access your Google GCS bucket, follow these steps:

  1. Log in to Google GCP.

  2. In the left-side navigation pane, choose Google Cloud Storage and then Settings.

  3. Click the Interoperability tab.

  4. (Optional.) If you have not enabled the Interoperability feature, click Interoperable Access.

    img

  5. Click the Create new Key button to create an Access/Secret key pair.

Other S3-compatible storage system​

If you choose other S3-compatible storage system, such as MinIO, configure StorageCredentialParams as follows:

"aws.s3.enable_ssl" = "{true | false}",
"aws.s3.enable_path_style_access" = "{true | false}",
"aws.s3.endpoint" = "<s3_endpoint>",
"aws.s3.access_key" = "<iam_user_access_key>",
"aws.s3.secret_key" = "<iam_user_secret_key>"

The following table describes the parameters you need to configure in StorageCredentialParams.

ParameterRequiredDescription
aws.s3.enable_sslYesSpecifies whether to enable SSL connection. Valid values: true and false. Default value: true.
aws.s3.enable_path_style_accessYesSpecifies whether to enable path-style URL access. Valid values: true and false. Default value: false.
aws.s3.endpointYesThe endpoint that is used to connect to your AWS S3 bucket.
aws.s3.access_keyYesThe access key of your AWS IAM user.
aws.s3.secret_keyYesThe secret key of your AWS IAM user.

opt_properties​

Specifies some optional parameters whose settings are applied to the entire load job. Syntax:

PROPERTIES ("<key1>" = "<value1>"[, "<key2>" = "<value2>" ...])

The following parameters are supported:

  • timeout

    Specifies the timeout period of the load job. Unit: second. The default timeout period is 4 hours. We recommend that you specify a timeout period shorter than 6 hours. If the load job does not finish within the timeout period, StarRocks cancels the load job and the status of the load job becomes CANCELLED.

    NOTE

    In most cases, you do not need to set the timeout period. We recommend that you set the timeout period only when the load job cannot finish within the default timeout period.

    Use the following formula to infer the timeout period:

    Timeout period > (Total size of the data files to be loaded x Total number of the data files to be loaded and the materialized views created on the data files)/(Average load speed x Maximum number of concurrent instances allowed per task)

    NOTE

    • "Average load speed" is the average load speed for your entire StarRocks cluster. The average load speed varies for each cluster depending on the server configuration and the maximum number of concurrent query tasks allowed for the cluster. You can infer the average load speed based on the load speeds of historical load jobs.

    • "Maximum number of concurrent instances allowed per task" is specified by the max_broker_concurrency parameter. For more information, see Job splitting and concurrent running.

    Suppose that you want to load a 1-GB data file on which two materialized views are created into a StarRocks cluster whose average load speed is 10 MB/s and maximum number of concurrent instances allowed per task is 3. The amount of time required for the data load is approximately 102 seconds.

    (1 x 1024 x 3)/(10 x 3) = 102 (second)

    For this example, we recommend that you set the timeout period to a value greater than 102 seconds.

  • max_filter_ratio

    Specifies the maximum error tolerance of the load job. The maximum error tolerance is the maximum percentage of rows that can be filtered out as a result of inadequate data quality. Valid values: 0~1. Default value: 0.

    • If you set this parameter to 0, StarRocks does not ignore unqualified rows during loading. As such, if the source data contains unqualified rows, the load job fails. This helps ensure the correctness of the data loaded into StarRocks.

    • If you set this parameter to a value greater than 0, StarRocks can ignore unqualified rows during loading. As such, the load job can succeed even if the source data contains unqualified rows.

      NOTE

      Rows that are filtered out due to inadequate data quality do not include rows that are filtered out by the WHERE clause.

    If the load job fails because the maximum error tolerance is set to 0, you can use SHOW LOAD to view the job result. Then, determine whether unqualified rows can be filtered out. If unqualified rows can be filtered out, calculate the maximum error tolerance based on the values returned for dpp.abnorm.ALL and dpp.norm.ALL in the job result, adjust the maximum error tolerance, and submit the load job again. The formula for calculating the maximum error tolerance is as follows:

    max_filter_ratio = [dpp.abnorm.ALL/(dpp.abnorm.ALL + dpp.norm.ALL)]

    The sum of the values returned for dpp.abnorm.ALL and dpp.norm.ALL is the total number of rows to be loaded.

  • load_mem_limit

    Specifies the maximum amount of memory that can be provided to the load job. Unit: bytes: The default memory limit is 2 GB.

  • strict_mode

    Specifies whether to enable the strict mode. Valid values: true and false. Default value: false. true specifies to enable the strict mode, and false specifies to disable the strict mode.

  • timezone

    Specifies the time zone of the load job. Default value: Asia/Shanghai. The time zone setting affects the results returned by functions such as strftime, alignment_timestamp, and from_unixtime. For more information, see Configure a time zone. The time zone specified in the timezone parameter is a session-level time zone.

  • priority

    Specifies the priority of the load job. Valid values: LOWEST, LOW, NORMAL, HIGH, and HIGHEST. Default value: NORMAL. Broker Load provides the FE parameter max_broker_load_job_concurrency, determines the maximum number of Broker Load jobs that can be concurrently run within your StarRocks cluster. If the number of Broker Load jobs that are submitted within the specified time period exceeds the maximum number, excessive jobs in the task pool will be waiting to be scheduled based on their priorities.

    You can use the ALTER LOAD statement to change the priority of an existing load job that is in the QUEUEING or LOADING state.

    StarRocks allows setting the priority parameter for a Broker Load job since v2.5.

Column mapping​

If the columns of the data file can be mapped one on one in sequence to the columns of the StarRocks table, you do not need to configure the column mapping between the data file and the StarRocks table.

If the columns of the data file cannot be mapped one on one in sequence to the columns of the StarRocks table, you need to use the columns parameter to configure the column mapping between the data file and the StarRocks table. This includes the following two use cases:

  • Same number of columns but different column sequence. Also, the data from the data file does not need to be computed by functions before it is loaded into the matching StarRocks table columns.

    In the columns parameter, you need to specify the names of the StarRocks table columns in the same sequence as how the data file columns are arranged.

    For example, the StarRocks table consists of three columns, which are col1, col2, and col3 in sequence, and the data file also consists of three columns, which can be mapped to the StarRocks table columns col3, col2, and col1 in sequence. In this case, you need to specify "columns: col3, col2, col1".

  • Different number of columns and different column sequence. Also, the data from the data file needs to be computed by functions before it is loaded into the matching StarRocks table columns.

    In the columns parameter, you need to specify the names of the StarRocks table columns in the same sequence as how the data file columns are arranged and specify the functions you want to use to compute the data. Two examples are as follows:

    • The StarRocks table consists of three columns, which are col1, col2, and col3 in sequence. The data file consists of four columns, among which the first three columns can be mapped in sequence to the StarRocks table columns col1, col2, and col3 and the fourth column cannot be mapped to any of the StarRocks table columns. In this case, you need to temporarily specify a name for the fourth column of the data file, and the temporary name must be different from any of the StarRocks table column names. For example, you can specify "columns: col1, col2, col3, temp", in which the fourth column of the data file is temporarily named temp.
    • The StarRocks table consists of three columns, which are year, month, and day in sequence. The data file consists of only one column that accommodates date and time values in yyyy-mm-dd hh:mm:ss format. In this case, you can specify "columns: col, year = year(col), month=month(col), day=day(col)", in which col is the temporary name of the data file column and the functions year = year(col), month=month(col), and day=day(col) are used to extract data from the data file column col and loads the data into the mapping StarRocks table columns. For example, year = year(col) is used to extract the yyyy data from the data file column col and loads the data into the StarRocks table column year.

For detailed examples, see Configure column mapping.

Examples​

This section uses HDFS as an example to describe various load configurations.

Load CSV data​

This section uses CSV as an example to explain the various parameter configurations that you can use to meet your diverse load requirements.

Set timeout period​

Your StarRocks database test_db contains a table named table1. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example1.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table1.

If you want to load all data from example1.csv into table1 within up to 3600 seconds, run the following command:

LOAD LABEL test_db.label1
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example1.csv")
    INTO TABLE table1
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
)
PROPERTIES
(
    "timeout" = "3600"
);

Set maximum error tolerance​

Your StarRocks database test_db contains a table named table2. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example2.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table2.

If you want to load all data from example2.csv into table2 with a maximum error tolerance of 0.1, run the following command:

LOAD LABEL test_db.label2
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example2.csv")
    INTO TABLE table2

)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
)
PROPERTIES
(
    "max_filter_ratio" = "0.1"
);

Load all data files from a file path​

Your StarRocks database test_db contains a table named table3. The table consists of three columns, which are col1, col2, and col3 in sequence.

All data files stored in the /user/starrocks/data/input/ path of your HDFS cluster also each consist of three columns, which are mapped in sequence onto col1, col2, and col3 of table3. The column separator used in these data files is \x01.

If you want to load data from all these data files stored in the hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/ path into table3, run the following command:

LOAD LABEL test_db.label3
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/*")
    INTO TABLE table3
    COLUMNS TERMINATED BY "\\x01"
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

Set NameNode HA mechanism​

Your StarRocks database test_db contains a table named table4. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example4.csv also consists of three columns, which are mapped onto col1, col2, and col3 of table4.

If you want to load all data from example4.csv into table4 with an HA mechanism configured for the NameNode, run the following command:

LOAD LABEL test_db.label4
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example4.csv")
    INTO TABLE table4
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>",
    "dfs.nameservices" = "my_ha",
    "dfs.ha.namenodes.my_ha" = "my_namenode1, my_namenode2","dfs.namenode.rpc-address.my_ha.my_namenode1" = "nn1_host:rpc_port",
    "dfs.namenode.rpc-address.my_ha.my_namenode2" = "nn2_host:rpc_port",
    "dfs.client.failover.proxy.provider" = "org.apache.hadoop.hdfs.server.namenode.ha.ConfiguredFailoverProxyProvider"
);

Set Kerberos authentication​

Your StarRocks database test_db contains a table named table5. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example5.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table5.

If you want to load all data from example5.csv into table5 with Kerberos authentication configured and the keytab file path specified, run the following command:

LOAD LABEL test_db.label5
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example5.csv")
    INTO TABLE table5
    COLUMNS TERMINATED BY "\t"
)
WITH BROKER
(
    "hadoop.security.authentication" = "kerberos",
    "kerberos_principal" = "starrocks@YOUR.COM",
    "kerberos_keytab" = "/home/starRocks/starRocks.keytab"
);

Revoke data loading​

Your StarRocks database test_db contains a table named table6. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example6.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table6.

You have loaded all data from example6.csv into table6 by running a Broker Load job.

If you want to revoke the data you have loaded, run the following command:

LOAD LABEL test_db.label6
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example6.csv")
    NEGATIVE
    INTO TABLE table6
    COLUMNS TERMINATED BY "\t"
)
WITH BROKER
(
    "hadoop.security.authentication" = "kerberos",
    "kerberos_principal" = "starrocks@YOUR.COM",
    "kerberos_keytab" = "/home/starRocks/starRocks.keytab"
);

Specify destination partitions​

Your StarRocks database test_db contains a table named table7. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example7.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table7.

If you want to load all data from example7.csv into two partitions, p1 and p2, of table7, run the following command:

LOAD LABEL test_db.label7
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example7.csv")
    INTO TABLE table7
    PARTITION (p1, p2)
    COLUMNS TERMINATED BY ","
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

Configure column mapping​

Your StarRocks database test_db contains a table named table8. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example8.csv also consists of three columns, which are mapped in sequence onto col2, col1, and col3 of table8.

If you want to load all data from example8.csv into table8, run the following command:

LOAD LABEL test_db.label8
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example8.csv")
    INTO TABLE table8
    COLUMNS TERMINATED BY ","
    (col2, col1, col3)
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

NOTE

In the preceding example, the columns of example8.csv cannot be mapped onto the columns of table8 in the same sequence as how these columns are arranged in table8. Therefore, you need to use column_list to configure the column mapping between example8.csv and table8.

Set filter conditions​

Your StarRocks database test_db contains a table named table9. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example9.csv also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table9.

If you want to load only the data records whose values in the first column are greater than 20180601 from example9.csv into table9, run the following command:

LOAD LABEL test_db.label9
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example9.csv")
    INTO TABLE table9
    (col1, col2, col3)
    where col1 > 20180601
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

NOTE

In the preceding example, the columns of example9.csv can be mapped onto the columns of table9 in the same sequence as how these columns are arranged in table9, but you need to use the WHERE clause to specify column-based filter conditions. Therefore, you need to use column_list to configure the column mapping between example9.csv and table9.

Load data into tables containing HLL-type columns​

Your StarRocks database test_db contains a table named table10. The table consists of four columns, which are id, col1, col2, and col3 in sequence. col1 and col2 are defined as HLL-type columns.

Your data file example10.csv consists of three columns, among which the first column is mapped onto id of table10 and the second and third columns are mapped in sequence onto col1 and col2 of table10. The values in the second and third columns of example10.csv can be converted into HLL-type data by using functions before they are loaded into col1 and col2 of table10.

If you want to load all data from example10.csv into table10, run the following command:

LOAD LABEL test_db.label10
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example10.csv")
    INTO TABLE table10
    COLUMNS TERMINATED BY ","
    (id, temp1, temp2)
    SET
    (
        col1 = hll_hash(temp1),
        col2 = hll_hash(temp2),
        col3 = empty_hll()
     )
 )
 WITH BROKER
 (
     "username" = "<hdfs_username>",
     "password" = "<hdfs_password>"
 );

NOTE

In the preceding example, the three columns of example10.csv are named id, temp1, and temp2 in sequence by using column_list. Then, functions are used to convert data as follows:

  • The hll_hash function is used to convert the values in temp1 and temp2 of example10.csv into HLL-type data and map temp1 and temp2 of example10.csv onto col1 and col2 of table10.

  • The hll_empty function is used to fill the specified default value into col3 of table10.

For usage of the functions hll_hash and hll_empty, see hll_hash and hll_empty.

Extract partition field values from file path​

Broker Load supports parsing the values of specific partition fields contained in a file path based on the column definitions of the destination StarRocks table. This feature of StarRocks is similar to the Partition Discovery feature of Apache Spark™.

Your StarRocks database test_db contains a table named table11. The table consists of five columns, which are col1, col2, col3, city, and utc_date in sequence.

The file path /user/starrocks/data/input/dir/city=beijing of your HDFS cluster contains the following data files:

  • /user/starrocks/data/input/dir/city=beijing/utc_date=2019-06-26/0000.csv

  • /user/starrocks/data/input/dir/city=beijing/utc_date=2019-06-26/0001.csv

These data files each consist of three columns, which are mapped in sequence onto col1, col2, and col3 of table11.

If you want to load data from all data files from the file path /user/starrocks/data/input/dir/city=beijing/utc_date=*/* into table11 and, at the same time, you want to extract the values of the partition fields city and utc_date contained in the file path and load the extracted values into city and utc_date of table11, run the following command:

LOAD LABEL test_db.label11
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/dir/city=beijing/*/*")
    INTO TABLE table11
    FORMAT AS "csv"
    (col1, col2, col3)
    COLUMNS FROM PATH AS (city, utc_date)
    SET (uniq_id = md5sum(k1, city))
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

Extract partition field values from %3A-included file path​

In HDFS, file paths cannot contain colons (:). All colons (:) will be converted into %3A.

Your StarRocks database test_db contains a table named table12. The table consists of three columns, which are data_time, col1, and col2 in sequence. The table schema is as follows:

data_time DATETIME,
col1        INT,
col2        INT

The file path /user/starrocks/data of your HDFS cluster contains the following data files:

  • /user/starrocks/data/data_time=2020-02-17 00%3A00%3A00/example12.csv

  • /user/starrocks/data/data_time=2020-02-18 00%3A00%3A00/example12.csv

If you want to load all data from example12.csv into table12 and, at the same time, you want to extract the values of the partition field data_time from the file path and load the extracted values into data_time of table12, run the following command:

LOAD LABEL test_db.label12
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/*/example12.csv")
    INTO TABLE table12
    COLUMNS TERMINATED BY ","
    FORMAT AS "csv"
    (col1,col2)
    COLUMNS FROM PATH AS (data_time)
    SET (data_time = str_to_date(data_time, '%Y-%m-%d %H%%3A%i%%3A%s'))
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

NOTE

In the preceding example, the values extracted from the partition field data_time are strings that contain %3A, such as 2020-02-17 00%3A00%3A00. Therefore, you need to use the str_to_date function to convert the strings into DATETIME-type data before they are loaded into data_time of table8.

Load Parquet data​

This section describes some parameters settings you need to take note of when you load Parquet data.

Your StarRocks database test_db contains a table named table13. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example13.parquet also consists of three columns, which are mapped in sequence onto col1, col2, and col3 of table13.

If you want to load all data from example13.parquet into table13, run the following command:

LOAD LABEL test_db.label13
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example13.parquet")
    INTO TABLE table13
    FORMAT AS "parquet"
    (col1, col2, col3)
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

NOTE

By default, when you load Parquet data, StarRocks determines the data file format based on whether the filename contains the extension .parquet. If the filename does not contain the extension .parquet, you must use FORMAT AS to specify the data file format as Parquet.

Load ORC data​

This section describes some parameters settings you need to take note of when you load ORC data.

Your StarRocks database test_db contains a table named table14. The table consists of three columns, which are col1, col2, and col3 in sequence.

Your data file example14.orc also contains three columns, which are mapped in sequence onto col1, col2, and col3 of table14.

If you want to load all data from example14.orc into table14, run the following command:

LOAD LABEL test_db.label14
(
    DATA INFILE("hdfs://<hdfs_host>:<hdfs_port>/user/starrocks/data/input/example14.orc")
    INTO TABLE table14
    FORMAT AS "orc"
    (col1, col2, col3)
)
WITH BROKER
(
    "username" = "<hdfs_username>",
    "password" = "<hdfs_password>"
);

NOTE

  • By default, when you load ORC data, StarRocks determines the data file format based on whether the filename contains the extension .orc. If the filename does not contain the extension .orc, you must use FORMAT AS to specify the data file format as ORC.

  • In StarRocks v2.3 and earlier, if the data file contains ARRAY-type columns, you must make sure that the columns of the ORC data file have the same names as their mapping columns in the StarRocks table and the columns cannot be specified in the SET clause.